User's Manual Part 2

Technical Specifications Appendix A
OEMV Family Installation and Operation User Manual Rev 5B 173
A.8.1 Port Pin-Outs
The pin numbering for each of the ports, is described in the tables that follow.
Table 37: FlexPak COM1 Port Pin-Out Descriptions
 For strobe signal descriptions, please see . See also Section 3.3.1, Strobes on Page 44.
Deutsch RS-232 Only
Connector Pin No. Signal Name
1GPIO
2 COM1_Rx
3CTS1
4 EVENT1
5GND
6 EVENT2
7RTS1
8 COM1_Tx
9
POUT
a
a. The current is limited to 1.5 A
10 PPS
11 USB D (+)
12 USB D (-)
13 ERROR