User's Manual Part 2

Ethernet Configuration Appendix C
OEMV Family Installation and Operation User Manual Rev 5B 203
Figure 77: Lantronix Redirector Configuration Dialog
C.3.4.1 Add the DL-V3 Ethernet Device’s IP Address and Port
Click on the Add IP button. The IP Service Setup screen appears. Figure 78 is an example using the
same IP address as configured in the Lantronix DeviceInstaller utility.
Figure 78: Lantronix Port Redirector: IP Service Setup
In the Host field, key in the DL-V3 Ethernet device’s IP address. Since the IP address is unique for
each installation, it is left up to the user to configure a valid IP address, typically static. For the port
setting, in the TCPPort field use 10001. Click OK to return you to the main Lantronix Redirector
Configuration dialog shown in Figure 77.
See also Section C.3.3.1, Network Settings Configuration on Page 198 and Section C.2, Configuration
Overview on Page 190.