User's Manual
Table Of Contents
- Introduction
- Installation and Setup
- Operation
- PC Utilities
- Bluetooth® Configuration
- Technical Specifications
- Commands
- B.1 Syntax Conventions
- B.2 BTCONTROL Enable/Disable Bluetooth
- B.3 COM Configure COM Port
- B.4 FRESET Clear Selected Data from NVM and Reset
- B.5 LOG Request Logs from the Receiver
- B.6 PDPFILTER Enable, disable or reset the PDP filter
- B.7 PDPMODE Select the PDP mode and dynamics
- B.8 RADARCFG Configure the ER output
- B.9 RESET Performs a hardware reset
- B.10 SBASCONTROL Set SBAS test mode and PRN
- Logs
- Replacement Parts
Installation and Setup Chapter 2
SMART-MR10 User Manual Rev 0B 25
2.1.4 Mounting Plates
Several mounting plate options are available for mounting the SMART-MR10 receiver:
• Universal mounting plate (NovAtel part number 70023085), shown in Figure 4 on page 25.
• Mounting plate with AG GPS 262 layout (NovAtel part number 70023086), shown in Figure 5 on
page 26.
• Pole-mount (NovAtel part number 70023087), shown in Figure 6 on page 27.
Figure 4: SMART-MR10 Universal Mounting Plate (70023085)