User's Manual
Table Of Contents
- Introduction
- Installation and Setup
- Operation
- PC Utilities
- Bluetooth® Configuration
- Technical Specifications
- Commands
- B.1 Syntax Conventions
- B.2 BTCONTROL Enable/Disable Bluetooth
- B.3 COM Configure COM Port
- B.4 FRESET Clear Selected Data from NVM and Reset
- B.5 LOG Request Logs from the Receiver
- B.6 PDPFILTER Enable, disable or reset the PDP filter
- B.7 PDPMODE Select the PDP mode and dynamics
- B.8 RADARCFG Configure the ER output
- B.9 RESET Performs a hardware reset
- B.10 SBASCONTROL Set SBAS test mode and PRN
- Logs
- Replacement Parts
60 SMART-MR10 User Manual Rev 0B
Chapter 5 Bluetooth® Configuration
5.2 Set Up a PC/Laptop with a Bluetooth Adaptor
If your PC/laptop is already Bluetooth-equipped and ready, proceed to Section 5.3 on Page 60
1. With the PC/laptop powered on, install the driver(s) from the disc that came with your Bluetooth
adapter.
2. Connect the Bluetooth adapter. An example of a D-Link USB adapter is shown in Figure 19:
Figure 19: Bluetooth Adapter for PC/Laptop
Within two minutes of connecting the USB adapter, the Bluetooth icon appears in the Windows
task bar as shown in Figure 20.
Figure 20: Bluetooth Standby: White
Continue on to the next section when you see the white Bluetooth icon. If the Bluetooth icon is
red, as shown in Figure 21, the Bluetooth installation on your PC/laptop is incorrect and you
should return to step #1.
Figure 21: Bluetooth Error: Red
5.3 Locate a Bluetooth-Enabled SMART-MR10 in Range
Ensure your PC/laptop is equipped with a built in, or external-plug-in, Bluetooth adapter and
is already configured with the appropriate Bluetooth driver.
1. Power on the SMART-MR10.
2. Double-click the Bluetooth icon in the task bar, as shown in Figure 20, or select Programs | My
Bluetooth Places from the Start menu in Windows. The My Bluetooth Places window opens.
3. Click the Search for devices in range option from the Bluetooth Tasks side bar on the left of the
My Bluetooth Places window. Bluetooth-enabled devices within range appear in the Entire
Bluetooth Neighborhood folder, as shown in Figure 22.