User's Manual

Technical Specifications Appendix A
SMART-MR10 User Manual Rev 0B 65
A.2 SMART-MR10 Specifications
f. Typical value. Almanac and recent ephemerides saved and approximate time entered. For more
information, Please refer to the “SETAPPROXTIME” command in the OEMV Family Firmware
Reference Manual found on our Web site at http://www.novatel.com/support/docupdates.htm
.
INPUT/OUTPUT CONNECTORS
SMART-MR10 COM/
PWR
+8 to +36 V DC at 2.5 W (typical while logging)
a
For the cable pinouts and drawings, see SMART-MR10 Evaluation
Cable (Part Number 01018515) starting on page 68 and SMART-MR10
Streamlined Cable (Part Number 01018526) starting on page 70.
Serial Com Ports 3 RS-232 serial ports (1 port configurable to RS422) [230,400 bps
maximum]
CAN SAE J1939/ ISO 11783/ ISO 11898 Compliant
Emulated Radar Output High = Supply Voltage -0.5V Minimum
Low = 0.5 V Maximum
Load = 3K Ohm Minimum
PPS Output 3.3 V CMOS Logic Compatible
MKI Input 3.3 V CMOS Logic/ 5 V Tolerant
Mode Pin 0 to 36 V DC (depending on the desired configuration, the Mode pin
can be left open, connected to ground, or connected to the supply
voltage)
INPUT/ OUTPUT CONNECTOR PROTECTION
Electrical Conducted/
Coupled disturbance
tolerance
ISO 7637-2:2004 (Survives all pulse types)
ISO 15003 (TBD)
LED INDICATORS
More details can also be found in Section 2.2.2, Status Indicators starting on Page 28
PHYSICAL
Size 223 mm x 223 mm x 90 mm height
Weight 2.2 kg maximum
ENVIRONMENTAL
Operating Temperature -40°C to +75°C
Storage Temperature -55°C to +90°C
Humidity Not to exceed 95% non-condensing
Immersion MIL-STD-810F Method 512.4 Procedure 1
Vibration
b
Random MIL-STD-810F Method 514.5 C17
Sinusoidal IEC 68-2-6 ASAE EP455, 5.15.2 Level 1 (TBD)
Shock MIL-STD-810 F Method 516.5