User's Manual
Table Of Contents
- Introduction
- Installation and Setup
- Operation
- PC Utilities
- Bluetooth® Configuration
- Technical Specifications
- Commands
- B.1 Syntax Conventions
- B.2 BTCONTROL Enable/Disable Bluetooth
- B.3 COM Configure COM Port
- B.4 FRESET Clear Selected Data from NVM and Reset
- B.5 LOG Request Logs from the Receiver
- B.6 PDPFILTER Enable, disable or reset the PDP filter
- B.7 PDPMODE Select the PDP mode and dynamics
- B.8 RADARCFG Configure the ER output
- B.9 RESET Performs a hardware reset
- B.10 SBASCONTROL Set SBAS test mode and PRN
- Logs
- Replacement Parts
90 SMART-MR10 User Manual Rev 0B
Appendix B Commands
Factory Default:
sbascontrol disable auto 0 none
Abbreviated ASCII Example 1:
sbascontrol enable waas 0 zerototwo
NovAtel's OEMV receivers work with SBAS systems including EGNOS (Europe), MSAS
(Japan) and WAAS (North America)
System Types
ASCII Binary Description
NONE 0 Don’t use any SBAS satellites
AUTO 1 Automatically determine satellite
system to use (default)
ANY 2 Use any and all SBAS satellites found
WAAS 3 Use only WAAS satellites
EGNOS 4 Use only EGNOS satellites
MSAS 5 Use only MSAS satellites