User's Manual
Table Of Contents
- Introduction
- Installation and Setup
- Operation
- PC Utilities
- Bluetooth® Configuration
- Technical Specifications
- Commands
- B.1 Syntax Conventions
- B.2 BTCONTROL Enable/Disable Bluetooth
- B.3 COM Configure COM Port
- B.4 FRESET Clear Selected Data from NVM and Reset
- B.5 LOG Request Logs from the Receiver
- B.6 PDPFILTER Enable, disable or reset the PDP filter
- B.7 PDPMODE Select the PDP mode and dynamics
- B.8 RADARCFG Configure the ER output
- B.9 RESET Performs a hardware reset
- B.10 SBASCONTROL Set SBAS test mode and PRN
- Logs
- Replacement Parts
98 SMART-MR10 User Manual Rev 0B
Appendix D Replacement Parts
The following are a list of the replacement parts available for your NovAtel SMART-MR10 receiver.
Should you require assistance, or need to order additional components, please contact your local
NovAtel dealer or Customer Service representative.
D.1 SMART-MR10
D.2 Accessories
The accessories above are also available from www.novatel.com
Part Description NovAtel Part
SMART-MR10 01018518
Full connectivity cable [23-pin socket to 3 DB-9 connectors, twisted CAN I/O pair, and
other bare wire connectors (see SMART-MR10 Evaluation Cable (Part Number
01018515) starting on Page 68)]
01018515
Streamlined cable 01018526
Universal Mounting Plate 70023085
AG GPS 262 Mounting Plate 70023086
Pole Mount 70023087
Part Description NovAtel Part
OEMV Family Compact Disc with PC utilities including CDU 01018235
OEMV Family Installation and Operation User Manual OM-20000093
OEMV Family Firmware Reference Manual OM-20000094