User Manual

18 19
LED sleep may be pressed to turn off all LEDs on Launchpad Mini. Press any button or pad to wake
up the device. This is useful for when you are not using Launchpad Mini but you do not want to
disconnect it from your computer.
Live Mode and Programmer Mode are the two states that Launchpad Mini can be used in. In Live
mode you may access Session Mode and Custom Modes and the device will function as normal. In
Programmer mode Launchpad Mini loses access to Session Mode and Custom Modes and the entire
surface (pads and buttons) becomes a clean slate. Each pad and button will send out a specified MIDI
message when pressed. The pads and buttons may be lit up by sending their corresponding MIDI
messages to Launchpad Mini. For more information see the Programmer’s Reference Guide, which can
be downloaded at customer.novationmusic.com/support/downloads.
To switch between Live Mode and Programmer Mode, enter the settings menu by pressing and
holding Session briefly. Press the green Scene Launch button to enter Live Mode, or the orange Scene
Launch button to enter Programmer Mode (see above image).
Launchpad Mini will always power on into Live Mode.