User Manual

26
Settings
Launchpad X’s settings menu allows you to set your preferences across many of its aspects. There are
four pages available: LED, velocity, aftertouch, and fader.
To enter the settings menu, press and hold Session briefly. The top 4 rows will display the characters
LED, indicating the topic of the menu. Use the top four Scene Launch buttons to access different
pages.
LED Settings
The first Scene Launch button accesses the LED settings for Launchpad X. Here you can change LED
brightness, LED feedback, and enter LED sleep.
The LED brightness level slider has 8 levels, from minimum to maximum brightness. The brightly lit
white pad indicates which level is currently selected.
LED feedback (internal) toggles whether pads on the 8x8 grid light up when pressed in Custom
Modes. Bright green indicates that LED feedback (internal) is enabled, whereas dim red indicates that
it is disabled. The setting is enabled by default.
LED feedback (external) toggles whether pads on the 8x8 grid light up when MIDI is received
externally in Custom Modes and Programmer Mode. Bright green indicates that LED feedback
(external) is enabled, whereas dim red indicates that it is disabled. The setting is enabled by default.