User's Manual

16 17
5.3.2 Clear a clip
Hold clear and press a clip on the 8x8 grid to clear it, deleting it from the Session View grid.
If in Note Mode, pressing Clear will instantly clear the currently selected clip.
5.3.3 Duplicate a clip
Hold duplicate and press a clip on the 8x8 grid to copy it to the clip slot below. This will overwrite
existing clips.
If in Note Mode, pressing Duplicate will instantly duplicate the currently selected clip and select the
newly created duplicate. This is useful when you want to create a new clip that is a variation on a
previous one.
5.3.4 Double a clip’s length
Double may be used to double a clip’s length. For example, a 2-bar clip becomes 4 bars.
• In Session Mode, hold Shift and Duplicate then press a pad to double the corresponding clip’s
length.
• If a clip is selected and playing in either Note or Device Mode, one press of Duplicate while holding
the Shift button will double clip length.
If in Note Mode, pressing Double will instantly double the currently selected clip. This is useful if you
want to create a variation of a loop and overdub it.
5.3.5 Quantise a clip
Hold quantise and press a clip on the 8x8 grid to quantise its contents. The MIDI notes in the clip will
be snapped to the grid to the closest 16th note interval.
5.3.6 Record Quantise
With Record Quantise enabled, any recorded MIDI will be automatically quantised to the grid with the
current quantisation setting.
Hold shift to see if Record Quantise is enabled or disabled. If the Quantise button is lit red, record
quantise is disabled. If it is lit green, Record Quantise is enabled. With shift held, press Quantise to
enabled or disable Record Quantise.
To change the quantisation setting in Live, navigate to the top bar and press Edit, then Record
Quantisation, then select from the available options.