User's Manual

22
11. Session Management
Enter the Sessions View by simply pressing the ‘Sessions’ button. In Sessions View, the square 8x2 pads become
locations for saving and loading your Sessions.
The arrows to the left of the 8x2 pad area are used to change pages of Sessions View. There are four available pages,
each containing 16 Sessions laid sequentially across the 16 pads. These four pages give you a total of 64 Sessions.
Sessions have names (to be created with Components), and you can change their colour as well. Press the
Save button once, then use the rst two soft buttons below the screens to select a colour. Press Save again
to conrm.
A. Load a Session
To load a session, rst enter Sessions View, then press a pad in the 8x2 pad area.
B. Save a Session
You can save your current Session at any time. Press the Save button once, and it will begin to ash. Press Save
again to conrm.
In Sessions View selected you also have the option to save the Session to a new location or change the colour of the
Session. Press the Save button once so that the Save button is ashing. You will notice that you can now use the two
left-most soft buttons below the screen to scroll through different session colours. Once you have found your preferred
colour, either press the Save button again to save in place or select a different session pad to save the Session to a
new slot. This will overwrite any data that is currently saved to that slot.
C. Clear a Session
After selecting a Session, hold Clear and press the current Session’s respective pad to clear all data and reset the
Session’s settings to the default.
D. Cued Session Switch
While the Sequencer is playing, you can prepare a new Session in the Session View. When you press a pad it will
begin ashing; this indicates that it is ‘cued’ to start at the end of the currently playing pattern on track 1 (master track).
At this point, the Session pad will turn white to show its selection.
E. Instant Session Switch
While the Sequencer is playing, it is possible to ‘instantly’ change to a new Session in the Session View. Just hold
Shift and press a pad. The new Session will pick up from the corresponding position in the currently playing pattern.
Tempo
INCONTROLGlobalShift
Zones
Sequencer
Latch
Arp
Scales
Sessions
Patterns
Steps
Save
Duplicate
Clear
Grid
Options
Pitch Modulation
Octave
Transpose
Track
_
+
Templates
Expand