User's Manual

After power off NTD36HD and TV, connect them like below procedure..

• The Composite AV cable is needed to connect with normal TV or Video and is for connecting

Composite video signal and 2CH audio signal simultaneously.

• Connect yellow cable to the Composite connector of NTD36HD and to the VIDEO connector of

TV set.

• Connect red cable to the FRONT-R connector of NTD36HD and to the Sound Input(Right) of

TV or Audio system.

• Connect white cable to the FRONT-L connector of NTD36HD and to the Sound Input(Left) of

TV or Audio system.

• You may refer to cable colors and connector colors.

• Please do not misunderstand Composite connectors and Component(Y, Pb, Pr) connector

which is located on the bottom line of NTD36HD rear side.

• If you want to use digital audio output(Optical, Coaxial), you don’t need to connect with red

cable and white cable.

• In case that your TV set has S-Video input connector, you may enjoy higher display quality by

connecting with S-Video cable.(note : As we do not supply S-Video cable, you need to

purchase it by yourself from shop)

• For more information, refer to user’s manual supplied by TV maker

Connecting to TV with Composite(AV) cable