User's Manual

SETUP Menu and How to set up

If needed to change setting values before using NTD36HD, you can open

SETUP Menu like below picture by pressing SETUP button of remote controller

or NTD36HD set.

• SETUP Menu is classified like VIDEO, AUDIO, ETC, NETWORK, WIRELESS, EXIT. You can

select each item with Left/Right (◀, ▶) button of remote controller or NTD36HD set.

• To change setting values, if selecting main item, sub items are listed up. You can select each

item with Up/Down(▼, ▲) button.

• After selecting sub item, press OK button. Then, changeable setting values are displayed.

• Once you select one of changeable setting values with Up/Down(▼, ▲) button, press OK

button. Then, the value is saved and applied.

• If you want to go out without changing setting values, press RETURN button before you press

OK button for confirming any selected value. Pressing RETURN button, it makes you go to

previous step.

• After completing new setting, you can go back to main menu by pressing RETURN button

several times, by pressing SETUP button or selecting EXIT icon.