User's Manual

ٻ
- 45 -
IP Address Setup :Ethernet Network
using a direct connection
Without a router or HUB, you can connect to a PC directly with crossed cable.
If your PC has only one LAN card and it is already occupied for internet connection,
you need one more LAN card for NTD37HD connection if you use both
simultaneously.
Please see the below guides step by step to set IP address.
1. Select Network Connection in
the Control Panel. Select the Local
Area Connection to be connected
with NTD37HD and click the right
button of mouse. Select
Properties.
2. Select internet Protocol
(TCP/IP) and click Properties
.