User's Manual

ٻ
- 60 -
Firmware update
This section explains how to update firmware.
Getting the latest firmware to enjoy the added features and improved function.
1. Firstly, visit NTD37HD website(
www.iamm.co.kr
) or designated website(Please ask the shop
where you bought NTD37HD). You can download the newest firmware and save it on your PC.
2. Please extract the compressed firmware file and move or copy the file into NTD37HD through
USB cable. If NTD37HD is connected an internal network, installing the newest firmware via
internal network is also possible without copying the firmware file into a NTD37HD. In this
case, the firmware file should be stored in the shared folder of PC.
3. Connect the NTD37HD to a TV and power it on. Click the “SETUP” button on remote controller
and go to ETC setting section of SETUP.
4. Select “Firmware update” and search the
folder where the new firmware file is saved.
5. Select update file and push “OK” button on
remote controller.
6. Firmware update will start automatically
when you select “Yes” on confirmation
message box.
7. NTD37HD will power off in 10 sec
automatically after update process is
completed successfully.
8. Power on NTD37HD again, then go to “ETC” section of SETUP. Select “Factory Reset” and
press “OK” button for factory reset. And, power off NTD37HD again. After this, you can enjoy with
new firmware.
* Caution !!!
While updating, please make sure that NTD37HD is not powered off. If powered off
while updating, the NTD37HD has t be repaired from customer service center.