User's Manual

ٻ
72
z As the network is not set up correctly. Try setting up again according to
“Setting up NETWORK(Page 31)
z Check cable connection status. Cables should be connected to each port
of the Router or switch HUB properly.
z The NTD37HD and PC are not on the same NET MASK( Subnet)
z Wrong IP address input, check the IP address and subnet mask
z The NETWORK icon is activated, but can not read the Shared DATA. In
this case, check whether firewall is set in PC. If firewall is set, please
disable it for NTD37HD to communicate with PC.
Contact to below for Customer Service
U
Problem related to NETWORK