Product Info
102
17-15-2. How to set 'cutting point' by manual
17-15-3. How to start cutting
② Press MENU key and confirm 'Multi-Cut to
wav...' to start analyzing waveform of the file.
There are four(4) spins to set 'cutting point'.
※ Press MENU key to toggle Enable/Disable for these spins
※ Role of each spin
-. -35 dB: to set max dB value for auto cutting.
Scope settable: -30dB~-40dB
-. 4.0 Sec: to set duration for the above max dB value.
Scope settable: 0.1 ~ 5 Sec
※ For example, if you set -35dB and 4.0Sec, 'cutting point' will
be created automatically at the points where volume level -35dB
below and the volume level(-35dB below) lasts for over 4 seconds
-. 1 X: to zoom graph by 1X, 2X, 4X, 8X, 16X ~ 128X
-. 1 Sec: to set 'seek time' unit when moving 'playing point' by
LEFT/RIGHT arrow key. Scope settable: 0.1~30 sec
-. 1/2/3/4/5: Number of track which will be cut
-. Vertical green line: Cutting point
-. Vertical blue line: Current playing point
① You have to disable four(4) spins.
② You can seek cutting point you want by LEFT/RIGHT key
(For this job, you can set 3rd spin and 4th spin properly)
③ You can set 'current playing point' as 'cutting point' by pressing UP arrow key
④ By pressing DOWN key, you can remove 'cutting point' within 10 sec and closest to 'current
playing point'.
① Set cutting points properly according to the above procedure
② Press RETURN key, then it will ask 'OK' or 'Cancel' like below