User's Manual

Preparation for Usage

To introduce preparation before you enjoy this device.

Procedure

1. Check whether all accessories are supplied properly.

2. Install HDD(Hard Disk Drive) into this device according to the procedure of HDD

installation(※ note : HDD jumper should be set as Master)

3. Connect AC adapter into this device, and connect it with PC through USB cable

4. Power on this device (with power button of top side, or with power button of remote

controller)

5. In case that the installed HDD is not formatted, please format it first according to

normal HDD format procedure

6. Copy media files in your PC to the HDD of this device.

7. After finishing copying files, disconnect this device from your PC system

8. Connect this device to TV set and(or) to audio system

9. Power on this device and change set-up value in SET-UP menu if needed. It is

recommended that it should be rebooted if you set up Network newly

10. Now, you are ready to enjoy this device freely

HDD Size HDD Type HDD Capacity HDD RPM

HDD buffer

Memory

3.5” SATA HDD

SATA I or II

Any capacity

available in

market

Over 7200 RPM Over 8M

Kinds of HDD to be installed