User's Manual

- 47 -
3. Select “Use the following IP
address”
Enter the IP address below.
IP address 192.168.0.1
Subnet mask 255.255.255.0
5. Then, start NTD38, press
“SETUP” button on your remote
controller and go to “NETWORK”
section. Select “Ethernet” on
“Network Connection” and “Static
IP” on “Address Setup” Then input
the following address.
IP Address 192.168.0.2
Netmask 255.255.255.0
Default gateway 192.168.0.1
Press “SETUP” on your remote to
exit this menu. Check that
NETWORK icon is highlighted on
main screen.