User's Manual

- 61 -
Firmware update
This section explains how to update firmware.
Getting the latest firmware to enjoy the added features and improved function.
1. Firstly, visit the designated website(Please ask the shop where you bought this device). You
can download the newest firmware and save it on your PC.
2. Please extract the compressed firmware file and move or copy the file into this device through
USB cable. If this device is connected an internal network, installing the newest firmware via
internal network is also possible without copying the firmware file into this device. In this case,
the firmware file should be stored in the shared folder of PC.
3. Connect this device to a TV and power it on. Click the “SETUP” button on remote controller and
go to ETC setting section of SETUP.
4. Select “Firmware update” and search the
folder where the new firmware file is saved.
5. Select update file and push “OK” button on
remote controller.
6. Firmware update will start automatically
when you select “Yes” on confirmation
message box.
7. this device will power off in 10 sec
automatically after update process is
completed successfully.
8. Power on this device again, then go to “ETC” section of SETUP. Select “Factory Reset” and
press “OK” button for factory reset. And, power it off again. After this, you can enjoy with new
firmware.
* Caution !!!
While updating, please make sure that this device is not powered off. If powered off
while updating, it has not been repaired from customer service center.