User's Manual

- 71 -
1. In case of no-sound or much noise
z Check whether stereo cable (A/V cable) is connected properly and tightly between
this device and TV set.
z Check if [MUTE] button is pressed and volume level is set properly
z Check whether digital audio cable is connected properly and tightly to the audio
input connectors of Home Theater System or Audio Amplifier
z Try changing the value(Down mix or pass through) of Audio Out on SET-UP menu
z Try changing audio cable with new one.
z Check the Audio channels(2channel or 5.1 channel) on SETUP MENU
2. In case of no-sound or bad sound quality when connected with digital audio
system
z Check the Audio channels(2channel or 5.1 channel) on SETUP MENU
z Set as ‘pass through’ on SETUP menu.
z Check the status of connection and set up for digital audio system(Refer to the
manual of digital audio system)
z Check whether optical cable or coaxial cable is connected properly and tightly
Problems related to Sound