User's Manual

- 73 -
z As the network is not set up correctly. Try setting up again according to
“Setting up NETWORK(Page 31)
z Check cable connection status. Cables should be connected to each port
of the Router or switch HUB properly.
z This device and PC are not on the same NET MASK( Subnet)
z Wrong IP address input, check the IP address and subnet mask
The NETWORK icon is activated, but can not read the Shared DATA. In this case, check
whether firewall is set in PC. If firewall is set, please disable it for this device to
communicate with PC.
Contact to below for Customer Service.
Problem related to NETWORK