User's Manual

- 38 -
WIRELESS (AD-HOC Setup)
There are several ways to set AD-HOC mode, but the following way is the easiest
way to set AD-HOC setup. Please see the following procedure.
NETWORK setting of this device
Go to NETWORK in SETUP menu
and enter the following lists.
A Î Wireless Net.
B ÎStatic IP
C Î200.200.0.2 (IP Address)
D Î255.255.255.0(Subnet Mask)
E Î200.200.0.1
WIRELESS setting of this device
Go to WIRELESS in SETUP menu
and enter the following lists.
A Î AD HOC.
B Î Enter ESSID(ex. abc)
C Î Select Channel (ex. Ch11)
D Î Select “WEP AUTO”
E Î Select “NONE"
Save setting and Return to main
To save setting and return to main,
press “SETUP” button on remote
controller.