Full Product Manual

INSTALLATION
INSTRUCTIONS
Stone
Vessel
Sinks
NOSV-AS
Please Note:
• Review and abide by all building and plumbing codes.
• Novao sinks need to be installed by a professional.
• Some counters require dierent cung methods; seek
the details of your chosen countertop material.
• Check to make sure the sink is sealed waterght.
Steps to Complete
Your Project
Novao’s vessel sinks can be installed sing on the
countertop or recessed down up to a third or even half
of its height. You may want to gure out the ideal sink
height you would like your vessel sink to be at. The
nished height is a personal preference. Most vanity
heights are set at 30”-32”. Aer a vessel sink is mounted
on the counter the vessel height will be 34-36 inches.
• Layout and place the sink and faucet of your choice in
the desired locaon. Using a pencil, mark the boom
of the sink hole and faucet base. Consider the ow of
the faucet when marking the locaon.
• Drill the countertop for the sink drain opening with
a 1 5/8” drill bit.
• Place the vessel on top of the counter and make sure
the drain ts down inside of the counter. To lower the
height of the sink, simply enlarge the hole.
• Use a bead of clear silicone to seal between the sink
and the counter.
• Use a level to ensure the vessel is level in every
direcon and install the drain.
• Secure the vessel to the counter with the fastener on
the drain. Be sure to not over ghten the drain
assembly. Hand ghtening will be sucient.
When cleaning up aer installaon, do not use abrasive
cleaners. Use so soap and warm water with a washcloth
to clean the surface.