Product Description

3.2.2. Product Integrations Guidelines
The X4C007 is designed for integration with the end product and has requirements for material and spacing
as shown below in order to deliver best possible directivity and sensitivity. The sensor is designed to accept
some spacing variations to the required metal backplane, and the airgap to front material of plastics, glass,
carbon etc. The metal backplane must have a minimum size equal to the sensor, and preferably be larger.
Figure 3.4. Product Integrations Guidelines
UnitMaxMinParameter
mm10X
1
mm10X
2
mm10Y
1
mm0Y
2
1
mm50Y
3
mm0.950.75Spacing from PCB component side to metal backplate, Z
1
mm0.30Spacing from PCB component side to metal backplate, Z
2
1
Sensor can extend below Y2 minimum value by 1 mm, if material below metal cavity is metal, e.g. aluminium foil.
Table 3.2. Product Integrations Guidelines
TBD-2020
Page 8 of 13
Rev. C - Advance
Copyright © 2019-2020 Novelda ASwww.novelda.com
X4C007 - Datasheet