User Guide

Setting Up iPrint on Your Server 13
iPrint Administration Guide
103-000136-001
August 31, 2001
Novell Confidential
Manual 99a38 July 17, 2001
2 Setting Up iPrint on Your Server
iPrint is based on the Novell
®
Distributed Print Services
TM
(NDPS
®
)
architecture. In order to use iPrint, you must have NDPS installed and
configured. If you do not have an NDPS system set up, refer to the Novell
Distributed Print Services Administration Guide for more information.
The following sections will assist you in preparing NDPS to work with iPrint
“Installing iPrint” on page 13
“iPrint System Requirements” on page 14
“Setting Up DNS for the Print Services Manager” on page 14
“Configuring iPrint” on page 15
Installing iPrint
If you chose to install iPrint/NDPS during the NetWare
®
6 installation, iPrint
software components were automatically installed on the server. If iPrint was
not installed during the installation, you need to install it by completing the
following steps.
1 From the GUI screen on the server, click Novell > Install.
2 If an iPrint/NDPS entry is listed, iPrint is already installed. If an entry
does not exist, click Add.
3 Insert the NetWare 6 Operating System CD into the drive.
4 Browse to the PRODUCT.NI file at the root of the CD.
5 Follow the installation prompts to install iPrint/NDPS.