User Guide

Installing Novell Native File Access Protocols 15
Novell Native File Access Protocols Installation and Administration Guide
103-000162-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
2 Installing Novell Native File Access
Protocols
To install the Novell
®
Native File Access Protocols, you must complete the
following:
1. Prepare the NetWare 6 server according to the instructions in “NetWare
Server Prerequisites” on page 15.
2. Set up a client workstation following the instructions in “Administrator
Workstation Prerequisites” on page 17.
3. Make sure that the computers to access the network are running a
supported version of the operating system as described in “Computer
Prerequisites” on page 17.
4. Install the software following the instructions in “Installing the Software
after Server Installation” on page 18.
After installing Novell Native File Access Protocols, you must create simple
passwords before users can access network resources. For instructions, see
Chapter 3, “Assigning Simple Passwords,” on page 27.
NetWare Server Prerequisites
The server must have the following configuration to run Novell Native File
Access Protocols.
HINT: Check the server configuration at the server console by entering
NWCONFIG; then select Product Options > View.
 NetWare 6 server operating system
 (For Macintosh only) Macintosh Name Space loaded on each traditional
volume before installing Novell Native File Access Protocols.