User Guide

18 Novell Native File Access Protocols Installation and Administration Guide
Novell Native File Access Protocols Installation and Administration Guide
103-000162-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Installing the Software during the Server Installation
Novell Native File Access Protocols are part of the NetWare 6 server
installation program. Instructions are located in the NetWare 6 Overview and
Installation Guide.
If you did not install the software during the NetWare 6 server installation, you
can install it by following the steps beginning with “Installing the Software
after Server Installation” on page 18.
Installing the Software after Server Installation
Novell Native File Access Protocols can installed after installing a NetWare 6
using NetWare Deployment Manager or the Graphical Server Console screen.
Each method provides an easy-to-follow installation program that guides you
through the required steps.
Before You Begin
1 Obtain the NetWare 6 Operating System CD.
2 Make sure that your NetWare server meets the prerequisites described in
“NetWare Server Prerequisites” on page 15.
3 Set up an Administrator Workstation by meeting the prerequisites
described in “Administrator Workstation Prerequisites” on page 17.
Accessing the Software
From the NetWare 6 Server Console
1
At the NetWare 6 server console, enter STARTX to launch the graphical
server console.
2 Click Novell > Install.
3 From the Installed Products screen, click Add.
4 Enter the path to the NetWare 6 Operating System CD and select the
PRODUCT.NI file.
The installation program begins.