User Guide
28 Novell Native File Access Protocols Installation and Administration Guide
Novell Native File Access Protocols Installation and Administration Guide
103-000162-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using ConsoleOne to Create Simple Passwords
ConsoleOne lets you create simple passwords for users one at a time by
completing the following procedure.
1 From the Administrator Workstation, log in as a user with the Supervisor
right.
Make sure that the Administrator Workstation meets the prerequisites
described in “Administrator Workstation Prerequisites” on page 17.
2 Run CONSOLEONE.EXE (located in
\PUBLIC\MGMT\CONSOLEONE\1.2\BIN\).
3 Right-click the User object and then click Properties.
4 Click the Login Methods tab and select Simple Password.
5 Click Assign Simple Password.
6 Enter the simple password in the fields provided.
If the simple password is different than the NetWare
®
password, the user
would enter the simple password when accessing the network with native
protocols and would enter the NetWare password when logging in with
the Novell Client
TM
software.
7 Click Apply.
8 Repeat these steps to create a simple password for each user that requires
network access using Novell Native File Access software.
Novell ConsoleOne