User Guide
Working with UNIX Machines 97
Novell Native File Access Protocols Installation and Administration Guide
103-000162-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
4
Make sure NISSERV.NLM is loaded.
5 Run MKSLAVE, to setup the NetWare machine as slave, with the
following parameters:
mkslave -d domainname -m master [-x contextname]
Setting Up a NetWare Server as NIS Client
1
Run NFSSTOP.
2 In the NetWare server, make sure that the parameter
NIS_CLIENT_ACCESS=1 in the file SYS:\ETC\NFS.CFG.
3 Run NFSSTART.
4 Set the default domain by entering
ypset domainname hostname/IP_address
ConsoleOne- Based Management for NIS Server
Nis Server Configuration Parameters
To Configure The Parameters Required For Nis Services, Right-click The
Nisserv_servername > Click Properties. A Panel Similar To The Following
Appears:
Figure 14 Nis Server-general Parameters Panel