User Guide

Setting Up 43
Server Communications Administration Guide
103-000145-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
1
Select and upgrade/install some servers to serve as Migration Agents in
the network section to be migrated.
2 Upgrade/Install all servers in the network section using the IP and IPX
option.
3 Upgrade/Install all clients in the network section using the IP only option.
4 Modify the configuration of the servers in the network section to be IP
only.
5 Turn off IPX networking between the selected section of the network and
the rest of the network.
The following figure shows how the steps above are applied in a sample
network.
Figure 9 Migrating a Section of the Network
1 Upgrade Server A to NetWare 6 as a Migration Agent.
2 Upgrade Server B to NetWare 6 using the IP and IPX install option.
3 Upgrade Server B to NetWare 6 using the IP and IPX install option.
4 Unbind IPX from the network adapters in server B and load scmd.nlm.
Unbind IPX from the network adapters in server A and reload scmd.nlm
without the Migration Agent option.
5 Turn off IPX routing at the router.
Client A Client B Client C
Router
Server A Server B
WAN
link