User Guide

Setting Up 51
NetWare TCP/IP Administration Guide
103-000151-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
and reinitialize the system. To avoid this problem, use INETCFG to load both
drivers.
3 Press Esc to return to the Internetworking Configuration menu.
Deleting a LAN Board
1 Load INETCFG and then click Boards
2 Select the board you want to delete and press Del.
A message is displayed indicating that deleting the board also deletes all
existing binds to the board's interfaces.
3 When prompted, select Yes to delete the board.
The board is removed from the list of configured boards.
4 Press Esc to return to the Internetworking Configuration menu.
5 Reinitialize system for the changes to take place.
Enabling TCP/IP
1 Load INETCFG and then click Protocols.
2 Select TCP/IP from the list of protocols.
3 In the TCP/IP screen, enable or disable the following:
 TCP/IP
 IP Packet Forwarding
 OSPF
 LAN Static Routing
 Dead Gateway Detection
 SNMP Manager
 DNS Resolver
 Load Balancing
 Fault Tolerance
 Filter Support
 NAT Implicit Filtering
 Expert Configuration