User Guide

52 NetWare TCP/IP Administration Guide
NetWare TCP/IP Administration Guide
103-000151-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
You can further set the detailed configuration of each of the above fields.
For more information of how to configure TCP/IP, see chapter Chapter 3,
“Setting Up,” on page 47.
Binding Protocols
1 Load INETCFG and then click Binding.
2 Select a protocol.
Here you need to enter data in terms of Protocol, Interface/Group, Status
and Identifier. There might be instances when you need to enter data in
the screens still to come and that is reflected here.
3 Enter the relevant parameter information in the Binding TCP/IP to a LAN
interface screen and then click Configure TCP/IP Bind options.
4 Either set both the Group Interface for LB/FT and Set as Primary
Interface to Yes or set the first one to No.
Setting the first to No enables RIP Bind Options, OSPF Bind Options and
Expert TCP/IP Bind Options. Choose the relevant screen and enter the
data into it.