User Guide

Setting Up NetWare 6 53
NetWare 6 Overview and Installation Guide
100-004725-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Installing Networking Protocols
NetWare 6 can process IP (Internet Protocol) network packets and traditional
IPX (Internetwork Packet Exchange
TM
) packets. Both protocols can be
assigned to a single network board, which allows the server to communicate
using IP and IPX.
To install IP, click a network board and then check the IP check box. Enter the
required IP information. To install IPX, click a network board and then check
the IPX check box.
If you choose to install IP and not IPX, the SERVERID reference is not used
and is removed from the AUTOEXEC.NCF file. You can add IPX after the
server installation by adding the SERVERID 8_digit_number command
after the SERVERNAME command in the AUTOEXEC.NCF file.