User Guide

88 Novell DNS/DHCP Management Utility Administration Guide
Novell DNS/DHCP Management Utility Administration Guide
103-000164-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Setting Up DHCP
This section provides the following procedures required to accomplish a basic
DHCP setup:
 “DHCP Prerequisites” on page 88
 “Setting Global DHCP Options” on page 89
 “Creating a DHCP Server Object” on page 91
 “Creating a Subnet Object” on page 91
 “Creating Subnet Address Ranges” on page 92
 “Creating IP Address Objects” on page 92
 “Loading the DHCP Server” on page 93
 “Configuring Clients to Use DHCP” on page 94
This section does not describe how to enable all the available features. For
more information refer to “Detailed DHCP Configuration” on page 94
DHCP Prerequisites
The following steps must be completed prior to setting up DHCP:
1. Load Netware 6 on the selected server or servers.
2. Install iManage.
3. Install Internet Explorer 5.0.
Setting Global DHCP Preferences
You can use Global Preferences to add, delete, or modify global data, such as
global DHCP options and global DHCP defaults. For more information about
setting global DHCP options, refer to “Setting Global DHCP Options” on
page 89. For more information about setting global DHCP defaults, refer to
“Setting Global DHCP Defaults” on page 89. For more information about
configuring the DHCP Options Table, refer to “Viewing the DHCP Options
Table” on page 90.