User Guide

102 Novell DNS/DHCP Management Utility Administration Guide
Novell DNS/DHCP Management Utility Administration Guide
103-000164-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
4
Enter the eDirectory context where the subnet pool record will be placed.
5 Click OK.
A message indicates that the new subnet pool object has been created.
Modifying a Subnet Pool Object
Refer to “Creating a Subnet Pool Object” on page 101 for information about
creating subnet pool objects. After a subnet pool object has been created, you
can modify its configuration parameters by completing the following steps:
1 Click DHCP Management > Subnet Pool Management to open the Subnet
Pool Management window in the main panel.
2 Select Modify Subnet Pool from the drop-down menu > click OK to open
the Modify Subnet Pool window.
3 Select the subnet object.
4 Click OK.
You can modify the Subnet Type configuration parameter. You can add a
subnet to a subnet pool or remove a subnet from the pool.
To add a subnet to a subnet pool, complete the following steps:
 Click Add.
 Select the subnet.
 Click OK.
To remove a subnet from a subnet pool, complete the following steps:
 Select the subnet.
 Click Delete.
Configuring Special Features
This section describes how to configure Netware 6 to use the special features
of Novell DNS/DHCP Services. The following configuration tasks are
described:
 “Configuring a DNS Server to be Authoritative for Multiple Zones” on
page 103
 “Configuring a Multi-Homed Server” on page 103