User Guide

104 Novell DNS/DHCP Management Utility Administration Guide
Novell DNS/DHCP Management Utility Administration Guide
103-000164-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
2
Select the desired Subnet Address Range and ensure that the range type
is set to Dynamic BOOTP and DHCP or Dynamic DHCP.
3 Set the DNS update option to Always Update.
4 Click Save.
Configuring Multiple Logical Networks
When you configure multiple logical networks, also known as virtual local
area networks (VLANs), you associate each individual LAN or Subnet object
with a Subnet Pool object. The Subnet object you associate with the Subnet
Pool object can be created prior to creating the Subnet Pool object, or an
existing subnet can be modified.
To configure multiple logical networks or VLANs, complete the following
steps:
1 Create a Subnet Pool object.
For detailed information about creating a Subnet Pool object, refer to
“Creating a Subnet Pool Object” on page 101.
2 Select a Subnet object or create and configure a new Subnet object.
3 Click Subnet Pool Management > Modify Subnet Pool and add the subnet
to the subnet pool with which to associate the subnet object.
4 Click OK.
5 Repeat Step 2 through Step 4 for each subnet you want to associate with
the Subnet Pool object.
Configuring for Auditing
You configure DNS and DHCP for auditing by using the DNS/DHCP
Management Utility as described in:
“Configuring DNS Auditing” on page 105
“Viewing the DNS Audit Trail Log” on page 105
“Viewing the DNS Event Log” on page 106
“Configuring DHCP Auditing” on page 108
“Viewing the DHCP Audit Trail Log” on page 108
“Viewing the DHCP Event Log” on page 110