User Guide

Setting Up 69
Filter Configuration
103-000178-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Figure 8 AppleTalk Routing Information Filter Example
Extended network 165-170 can be hidden from the rest of the organization if
an outgoing route filter is configured on Router C.
The route being hidden from the rest of the network is extended network 165-
170. Router C's connection to the departments outside Accounting is through
the FDDI backbone. The destination from which to hide the Accounting
network is most easily defined as the interface to the backbone. Note that no
node or server in the internetwork can see the Accounting network 165-170.
However, nodes in Accounting can see the internetwork routes, but cannot see
any devices on the internetwork.
When configuring this example, set the parameters as shown in Table 8.
Table 8 Parameters for AppleTalk Routing Information Filter Example
Parameter Value
Action Deny
Filtered Route:
Route to Network or Zone
.
Multiple/Extended Network
Network Number/Range 165-170
Destination Type
Destination
Interface
FDDI
Router C
AppleTalk Extended
Network 165–170
AppleTalk Extended
Network 1–10
AppleTalk Extended Network 21–30
Router B
Router A
External Internetwork
Zone =
Accounting
Department
FDDI