User Guide

72 Filter Configuration
Filter Configuration
103-000178-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
This displays the action taken when a packet matches a filter in the filter
list. The only action possible is to select Deny Packets .
3 Select Filters .
This lists the packets that are permitted or denied, according to the Action
parameter setting.
4 Modify the filter list.
Select a filter from the list and press Enter to modify the filter or Del to
remove it. Press Ins to add a new filter.
If you are modifying an existing filter or adding a new filter, specify the
following parameters from the Define Filter menu:
 Source Ring Number —Enter a number in the range of 1 to FFF
(hexadecimal).
 Comment —Enter an optional short description.
5 Press Esc and save the filter information.
NOTE: All changes to the filter list take place immediately.
6 Press Esc to return to the Configure Source Route Bridge Filters menu.