User Guide

Using NetWare Accelerated Upgrade 13
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Upgrading to NetWare 6
To run NetWare Accelerated Upgrade, complete the following tasks:
1. Prepare the Workstation (page 13)
2. Prepare a Staging Server (page 13)
3. Prepare the Network (page 17)
4. Prepare the Target Server (page 15)
5. Run NetWare Accelerated Upgrade (page 18)
6. Complete Post-Upgrade Tasks (page 20)
Prepare the Workstation
 A Windows 95/98, Windows NT*, Windows 2000, or Windows ME
workstation with 50 MB of available disk space.
 The Windows 95/98 and Windows ME workstations must be running
Novell
®
Client
TM
version 3.3 or later and Support Pack 1 or later
 The Windows NT and Windows 2000 workstations must be running
Novell Client for Windows version 4.8 or later and Support Pack 1
or later
 PS/2* or serial mouse recommended, but not required.
Continue with the next section, "Prepare a Staging Server."
Prepare a Staging Server
The staging server holds a copy of the NetWare 6 Operating System CD files.
From this one location, all targeted servers can be upgraded. The staging
server can be any server other than the server you plan to upgrade and the
client workstation you are using to run NetWare Accelerated Upgrade.
1 Do one of the following:
 Copy the NetWare 6 Operating System CD files to a volume on the
staging server. Make sure that all target servers can access the staging
server and the client workstation.
 Mount the NetWare 6 Operating System CD as a volume on the
staging server.