User Guide

16 Other Installation Options
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 Prompt enter Exit, at the Distributor console.
 Select Subscriber from the list.
 Prompt enter Exit, at the Subscriber console.
 Select ZENworks for Servers from the list.
 Prompt enter Exit, at the ZENworks for Servers console.
 Select Remote Web Console from the list.
 Prompt enter Exit, at the Remote Web Console.
The following table lists the procedures that NetWare Accelerated Upgrade
does not support during a NetWare 4 or NetWare 5 upgrade.
Table 1 Unsupported Procedures When Upgrading a NetWare 4 or NetWare 5 Target Server
Once you have met the hardware requirements, complete the following steps
to prepare your target server to be upgraded:
1 Update the target server with the latest NetWare Support Pack.
Support Packs are available at the Novell Support Web site (http://
www.support.novell.com/filefinder).
 NetWare 4.11 and NetWare 4.2 require NetWare 4 Support Pack 8
(IWSP6A.EXE) or later
 NetWare 5.0 requires NetWare 5 Support Pack 6 or later
 NetWare 5.1 requires NetWare 5 Support Pack 2 or later
2 (Conditional) If you are upgrading a server in a multiserver tree that is
running NDS
®
7 with NSS volumes, do the following:
2a Run the NetWare Deployment Manager utility (NWDEPLOY.EXE),
located at the root of the NetWare 6 Operating System CD.
2b Click Network Preparation > Prepare a Server with NDS 7 & NSS.
Not Supported during an Upgrade Recommendation
Adding the IP protocol during the
upgrade
Add the IP protocol after upgrading by
using NetWare 6 utilities such as
INETCFG, or use the NetWare 6
Installation program to upgrade.