User Guide

Using NetWare Accelerated Upgrade 21
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
specific drivers manually, you must create and configure a \STARTUP
directory that contains the disk drivers and the STARTUP.NCF file.
1 Copy the NetWare 6 Operating System CD files to a volume on a staging
server.
IMPORTANT: Do not copy the files onto the target server that you are upgrading
or onto the client workstation.
2 Make sure that the target server can connect to the staging server.
3 Copy any additional .HAM and .CDM disk drivers that you need to the
\STARTUP directory on the staging server.
4 Continue with “Prepare the Network” on page 17.
Troubleshooting Server-to-Server Connections
If you could not make a server-to-server connection during NetWare
Accelerated Upgrade, try one or more of the possible solutions.
Disabling SAP Filtering
1 At the server console of the target server, enter
INETCFG
2 Select Protocols > IPX > Filtering Support.
If SAP filtering cannot be disabled, make sure that the client workstation is on
the same LAN segment as the target and staging servers.
Detaching from Unauthenticated Servers
1 From a Windows 95/98 or Windows NT client, right-click the red
Novell N.
2 Click NetWare Connections.
3 Select the server that you are not authenticated to.
4 Click Detach.
If you are still having problems communicating with the target server, reboot
the client workstation and try to log in to the target server again.