User Guide

Managing Servers Remotely 59
NetWare Remote Manager Administration Guide
103-000144-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Many of the profiling operations in NetWare Remote Manager
(PORTAL.NLM) require at least a Pentium* Pro processor (family 6 or
higher). If the processor is a Pentium III or higher model, the processor serial
number is also displayed.
If more than one processor is present, you can stop and start processors
individually (except for P0) by clicking the corresponding Stop/Start
processor link.
Viewing Storage and Network Adapter Information
To view information about the storage and network adapters that are installed
on the server and the slots they are in, access the Hardware Adapter page by
clicking the Disk/LAN Adapter link in the navigation frame.
If the driver does not register a slot, it is reported as an ISA slot.
To view additional storage adapter information, use the following links:
 Storage Statistics button displays statistical information for the media
manager of the server.
 Info link displays the resources registered for that adapter.
 Name link displays the information for the devices that are controlled by
the adapter.
To view additional Network Adapters information, use the following links:
 Storage Statistics button displays the statistics generated and
maintained by the Link Support Layer (LSL) of the server.
 Info link displays the resources registered and counter information for
that adapter.
 Name link displays the frame types and protocols that are bound to that
adapter.
Viewing PCI Device Information
To view a list of Hardware Instance Numbers (HIN), access the PCI Device
Information page by clicking the PCI Devices link in the navigation frame.
Each HIN represents a hardware device.
To view the Peripheral Component Interconnect (PCI) configuration space
and hexidecimal offset for a HIN, click the specific HIN link.