User Guide

Utilities 13
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using ADD NAME SPACE
 You need to add a name space only once to a volume with the ADD
NAME SPACE command.
Each time you mount a volume to which you added a name space (for
example, each time you bring up the server), the corresponding name
space module is autoloaded.
NOTE: Because you don’t need to add a name space to a volume each time the
server comes up, you don’t need to put the ADD NAME SPACE command in the
autoexec.ncf file.
 When name space support is added to a volume, another entry is created
in the directory table for the directory and file naming conventions of that
name space (file system).
Additional Information
AIOCON
Purpose
Configure low-level port information. You can use this utility by loading
NIASCFG and following this path:
Select Configure NIAS > Remote Access > Configure Ports
AIOPDCON
Purpose
Create Packet Assembler Disassembler (PAD) profiles used to configure PAD
parameters for X.25 connections. You can use this utility by loading
NIASCFG and following this path:
Select Configure NIAS > Remote Access > Set Up... > Configure AIOPAD
Parameters
Topic See
Adding name space support Adding a Name Space