User Guide

Automating the NetWare Installation with a Response File 49
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Frame Type n = <frame type>
Logical Name n = <string>
Octet Bit Order = <string>
Default (none)
Values (frame types supported by the driver are found in the
driver’s LDI file)
Key Required No
Example Frame Type 1 = Ethernet_802.2
Purpose Identifies the network frame type to be used when loading
the driver. There can be as many descriptions as there
are frame types supported by the driver—n uniquely
identifies the frame type (for example, 1, 2, etc.).
Default (none)
Values (text combining the Frame Type with the Adapter Name)
Key Required No
Example Logical Name 1 = 3C59X_1_E82
Purpose Identifies the name to be used when binding a protocol to
a frame type on this adapter. There must be a logical
name for each frame type loaded with the driver—n
uniquely identifies the frame type (for example, 1, 2,
etc.).
Default LSB
Values LSB or MSB
Key Required No
Example Octet Bit Order = LSB
Purpose Specifies the bit order (Least Significant Bit or Most
Significant Bit) that this network adapter uses for
deciphering the node address.