User Guide

Utilities 23
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Additional Information
CAPITRCE
Purpose
If a problem with a PPP over ISDN connection cannot be traced to the PPP
layer, CAPITRCE can be used to observe and debug negotiation between the
CAPI Manager and its upper and lower layers (the CAPI adaptation layer and
CAPI driver, respectively).
CAPTURE
Purpose
CAPTURE is a command line utility that allows you to print from applications
not designed for NetWare
®
print services. It sets up redirection parameters for
printing output from your workstation; the NetWare DOS Requester
TM
software then redirects the workstation output from an LPT port to the
specified network printer or file.
NOTE: This utility is for use with Novell’s legacy, queue-based print services.
Novell
®
Distributed Print Services
®
(NDPS
®
) is the default and preferred print
system in NetWare 6. Queue-based printing is fully supported in NetWare 6, which
allows your users to continue printing as they always have until you complete the
transition to NDPS
®
.
For a discussion of NDPS support for legacy printing, see Supporting Queue-
Based Client Workstations. For information on migrating to NDPS, see Planning
the Migration to Novell Distributed Print Services.
Topic See
Binding a protocol to a driver “INETCFG” on page 69
Viewing a list of
communication protocols
“PROTOCOL” on page 141
Loading LAN drivers “LOAD” on page 86