User Guide

50 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 DOWN executes a shutdown.ncf file if one is present.
For example, although most modules, including those in protected
address spaces, unload automatically when you down or restart the server,
some modules might require that you unload them individually first.
You can unload them manually at the server prompt. Or you can simply
place the UNLOAD commands in a shutdown.ncf file. (Run the
MODULES command to determine address spaces for specific modules.)
Additional Information
DSDIAG (DS DIAGNOSTICS)
Purpose
Use at the server console to
 Document your current eDirectory
TM
configuration
 Check the health of your eDirectory tree
 Diagnose or pinpoint problems
Syntax
[LOAD] [path]DSDIAG
Topic See
Bring down the NetWare
server
Starting and Stopping the Server
Restart the server without
rebooting it
“RESTART SERVER” on page 166
Creating server batch files Using Server Batch Files
Determine the address
space a module is loaded in
“MODULES” on page 101
Parameter Use to
path Specify the path to DSDIAG.NLM if you moved
it from the default directory of SYS:SYSTEM.