User Guide

Utilities 75
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 IPXCON uses Simple Network Management Protocol (SNMP) to
exchange management information and operational statistics with remote
IPX routers.
 IPXCON operates over both IPX and TCP/IP networks.
 To execute IPXCON automatically each time you boot the server, add the
LOAD IPXCON command after the INITSYS.NCF line in your
AUTOEXEC.NCF file.
IPX Information View statistics for the selected router’s IPX
packet routing.
To display additional packet routing statistics,
select Detailed IPX Information from the
bottom of the IPX Information window.
IPX Router Information View general information about the selected
IPX router.
NLSP Information View the following NLSP information about the
selected router:
System information
Area addresses
Neighbors
Routers
LANs
LSPs
To view the Link State Packets (LSPs) received
by the system, load IPXCON by typing
[LOAD] IPXCON /P
The LSP option is enabled only if the server is
running NLSP.
Circuits View circuit information.
Forwarding View the Forwarding table.
Services View information for the currently reachable
services.
Option Use to