User Guide

106 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Server Up Time Time elapsed since the server was most recently started.
This value is displayed in the format DD:HH:MM:SS
(days:hours:minutes:seconds).
Use this information to detect power failures or to determine
whether an intruder brought down the server.
Online Processors The number of enabled and active processors.
Original Cache Buffers The original size of the cache buffer pool, which is the number of
cache buffers available when the server is booted. All memory not
used to load NetWare
®
(code plus loader) is assigned to the cache
buffer pool. Memory is borrowed from this pool as needed.
The default size of a cache buffer is a 4096-byte memory page.
Total Cache Buffers The number of cache buffers currently available for file caching after
allocating memory for NetWare. This number decreases as
modules are loaded or memory is allocated in other ways.
A minimum parameter controls when the server cannot continue to
allocate file cache buffers. An alert can be set to report when the
number of cache buffers approaches this limit.
See SET “File Caching Parameters” on page 237 for a description
of these parameters. You can set these parameter values in
MONITOR Available Options > Server Parameters > File Caching
Parameters. You can also use the SET utility.
The Disk Cache Utilization option provides additional file cache
buffer statistics for assessing RAM.
Field Explanation