User Guide

118 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using MOUNT
 If you set up the AUTOEXEC.NCF file to mount all volumes
automatically each time the server comes up, then you would use the
MOUNT command only if you have dismounted a volume and want to
remount it.
 After you replace a removable drive, use this command to mount all
volumes residing on the removable drive.
 You can mount and dismount volumes while the server is running.
 You can also use NWCONFIG to mount a volume. Select Installation
Options > Volume Options.
Examples
 To mount volume STATISTICS, type
MOUNT STATISTICS
 To mount all unmounted volumes at once, type
MOUNT ALL
Parameter Use to
volume_name Specify the name of the volume you want to
mount.
ALL Mount all volumes not mounted.